mitchell and brown
Hotel Mode


Hotel Mode

Hotel Mode is a function available to some Mitchell & Brown TV models, it does not allow the guest to alter the settings of the TV once the Hotel Administrator has set it.

This function supports two modes – Administrator mode and Guest mode. In the Administrator mode, the TV will function as a normal TV.

Hotel Mode vhas advanced options like customisable/personal welcome screens, they allow access to key hotel information at the touch of a button.

 

Key Benefits of Hotel mode TVs:


TV menu set up can by locked and pin protected:

Menu is restricted and protected by a PIN

TV always comes on from standby to a designated channel, i.e. BBC1:

The TV can be set to come onto a default TV or Radio channel or any AV input, this reduces complaint calls when a guest turns on a TV and the last used channel was an AV channel and the TV channels are not displayed

Welcome splash screen, custom hotel image displayed when the TV is turned on:

TVs can be configured to show an image on start up for between 1 and 10 seconds, generally an image of the hotel logo or similar

Undesired channels can be deleted from the channel line-up:

With single channel map you are able to choose the channels to display, this is useful in family rooms

USB cloning for new channel line-ups and updated tuning:

With the same TV’s in every room, a single TV is set up exactly as required, channel line-up, max volume, default channel etc., this configuration is then loaded from the TV on to a USB stick. Take the USB to the next room and upload the configuration to the next TV, it’s that simple and takes a few minutes.

Maximum Volume:

TV set can be set to a maximum volume level to avoid upsetting the neighbouring guests

TV on Volume:

TV set can be set to an acceptable volume level when turned on from standby.

Remote control pairing:

Remote controls are paired to the TV, useful in suites or rooms with more than one TV